Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - isurfsafe

Pages: [1]

I come from using 6 and have figured out how to us 7.3 to mark sections as cut, but there is one thing I am not sure of.

In version 6, when selecting to cut something and then marking begin and end, that piece of cut video would show collapsed on the timeline and when I pressed play, the video would skip the cut section and I would see what the finished product would look like.

Now, it leaves the cut section uncollapsed and tinted with red and when playing, still plays the cut section.  When outputting the video, the final result does remove the cut sections, though.

Is there a way to toggle having the playback skip the cut sections so that I can view how the video will ultimately be saved?
i come from 6 too but the collapsed video always plays when i see what it will look like apology i am wrong collapsed does not play

6 was better but no mkv sound .

SolveigMM Video Splitter / Re: selecting part to delete
« on: August 21, 2019, 01:17:29 PM »
OK see now re
The cut-intervals automatically collapsed when you work in a "Cut" mode.
You can collapse the cut interval manually in your mode - just double-click the cut interval and you'll see how collapsing works.

SolveigMM Video Splitter / Re: No sound mkv file
« on: February 15, 2019, 07:59:10 PM »
Hello isurfsafe,
Unfortunately, the "OPUS" audio is not supported by Video Splitter at this time. I'll let you know whenever the support for this type of audio is implemented.
No mkv has sound? not much good

SolveigMM Video Splitter / No sound mkv file
« on: February 13, 2019, 11:14:28 PM »
SOLVEIGMM VIDEO SPLITTER  Business Edition Portable
Installed Version: 6.1.1808.03  •  Version 6.1.1808.3

MKV files says Unable to render audio. Necesary codecs not found

Wn 7 64 bit

Here is the sound file data. WhaT CODEC is needed

ID                                       : 2
Format                                   : Opus
Codec ID                                 : A_OPUS
Duration                                 : 4 min 38 s
Channel(s)                               : 2 channels
Channel positions                        : Front: L R
Sampling rate                            : 48.0 kHz
Bit depth                                : 32 bits
Compression mode                         : Lossy
Language                                 : English
Default                                  : Yes
Forced                                   : No
DURATION                                 : 00:04:38.481000000

Link from GUI goes to

refers to Can't render an audio stream AC3 / AAC / Xvid

it only shows the video way off center and to the upper left
That looks to me like when the loaded video appears. i have that

The video player has a central purple box with black on both sides of the purple box
i cannot see a purple box with black sides?
The only part missing seems to me to be the large preview screen . Did you try this " Please try to go to Tools -> Preferences -> Playback Settings tab and select other video renderers" at

Is it an unusual video. google media info and see is it any different to other video

SolveigMM Video Splitter / Re: selecting part to delete
« on: September 04, 2018, 05:00:29 PM »
don't know why they call this support forum . no support

SolveigMM Video Splitter / selecting part to delete
« on: August 30, 2018, 03:39:50 AM »
How do you know which is the selected part with video splitter 6.1.1705.18?  what does collapse mean?. is collapsed part  the darker part - the part to delete?.
Also when i select the End  marker the marker goes all the way to then end of the video not to where the cursor is?
The pdf says
After placing the End Marker the selected fragment will be collapsed. So you will see the special one line instead of two lines of Begin/End Marker depicts the collapsed fragment.
What is the special one line instead of two lines?

Good program. Far too complicated. I suggest you put a green filter  over the parts that will be saved and a red filter over the parts that will be deleted like this

SolveigMM Video Splitter / Re: screenshot option
« on: February 06, 2018, 02:06:12 AM »
Thanks for clarifying. would be good if video splitter could inser a screenshot into an edited movie

SolveigMM Video Splitter / codec for mkv audio
« on: February 06, 2018, 02:02:26 AM »
I tried to edit an mkv but no audio
here is media infor report. What codec do I need
Complete name                            : C:\Users\movie.mkv
Format                                   : Matroska
Format version                           : Version 4 / Version 2
File size                                : 157 MiB
Duration                                 : 5 min 45 s
Overall bit rate                         : 3 817 kb/s
Writing application                      : Lavf57.11.100
Writing library                          : Lavf57.11.100 / Lavf57.11.100

ID                                       : 1
Format                                   : AVC
Format/Info                              : Advanced Video Codec
Format profile                           : High@L4
Format settings, CABAC                   : Yes
Format settings, ReFrames                : 2 frames
Codec ID                                 : V_MPEG4/ISO/AVC
Duration                                 : 5 min 45 s
Width                                    : 1 920 pixels
Height                                   : 1 080 pixels
Display aspect ratio                     : 16:9
Frame rate mode                          : Constant
Frame rate                               : 25.000 FPS
Color space                              : YUV
Chroma subsampling                       : 4:2:0
Bit depth                                : 8 bits
Scan type                                : Progressive
Default                                  : Yes
Forced                                   : No
Encoded date                             : UTC 2015-01-27 19:00:46
DURATION                                 : 00:05:45.600000000
HANDLER_NAME                             : VideoHandler

ID                                       : 2
Format                                   : Opus
Codec ID                                 : A_OPUS
Duration                                 : 5 min 45 s
Channel(s)                               : 2 channels
Channel positions                        : Front: L R
Sampling rate                            : 48.0 kHz
Compression mode                         : Lossy
Language                                 : English
Default                                  : Yes
Forced                                   : No
DURATION                                 : 00:05:45.641000000

are all code here  safe?

SolveigMM Video Splitter / Re: screenshot option
« on: January 26, 2018, 01:33:06 AM »
Hello isurfsafe,

I'm sorry for the delay in replying.

I'd like to explain that Video Splitter's main goal is to edit the Video/Audio file preserving the source video quality and it works without re-encoding. That is why we currently do not support any kind of transitions and effects. Adding frames to video involves re-encoding and could possibly cause the synchronization issues with the audio. That is why Video Splitter does not have such feature now.
However, we have an utility, which can combine multiple pictures of the same width and height to a video file.

Please check the the following topic:
ok why does video splitter have the option to take screenshots then? what does one do with them?

SolveigMM Video Splitter / Re: screenshot option
« on: January 23, 2018, 07:10:01 PM »
As you cannot bother answering  i will not buy this program

SolveigMM Video Splitter / screenshot option
« on: January 21, 2018, 11:28:09 AM »
Why is there a screenshot option when jpegs cannot be joined to video, at least flv?

SolveigMM Video Splitter / re editing a movie
« on: January 21, 2018, 04:15:55 AM »
I removed some part from an flv file and when played back the final movie see there is a one second image i do not want. Can i open the ssp and remove that. I have tried opening the ssp file and choosing a start and end point but it does not remove it

Also I do not understand why there are some white flags and some blue flags when i open the ssp

Windows 7 64 bit

Pages: [1]