Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - Marty

Pages: 1 [2] 3 4 5
16
Hello,

just got the update info of the release of 7.3.2002.06, so i installed it...
and while doing some cut of some files, the save (separated cut) stop in the middle, after processing one or two cut, it stop.. i can hit the cancel button... i relaunch the save.. and ... freeze again, now it's on an another video, and it freeze at 4/6.

no other choice to go back to the previous version. can send the files if needed to the support  >:(

17
Video Splitter / Re: Dump file is 5Gb, how to stop it ?
« on: November 26, 2019, 07:07:42 PM »
Hello Marty,
You can delete log files, they do not affect the software performance. Also, you should probably turn off the logging in "Tools"-"Logging"-"Enable logs" menu.

it was already turned off, that's why i don't understand why i have a 4Gb file at c:/logs/ including :
SMM_TimelinePreviewObj.log
trimgraphEntry0 and trimgraphEntry1
the date are from the last time i used the software.
when i go into tools / read logs, it give an another place : C:\Users\mycomputername\Documents\Solveig Multimedia\Logs

i still have a whole slow down of windows 10 when running your software. the software itself work almost ok(despite numerous crash and a subtitle track where the sync is broken), but everything else outside of the software has a major slowdown (explorer, etc..) no indication at all in the task manager (memory is fine, no activity from the graphic card). it's like the software use the whole memory of the graphic card, but no indication at all in task manager.

(this issue has been reported here by an another user)

System is : Windows 10 Pro x64
System on SSD Samsung EVO 512Gb (system has only SSd, no mecanic HardDisc anymore)
32Gb of DDR4 Ram
I7-7700 intel Processor
graphic Card GT640 Zotac + HD630 intel Graphics (processor)
Mini Itx mother board Asrock H270M-Itx A/C

Thanks for any help !

18
Video Splitter / Dump file is 5Gb, how to stop it ?
« on: November 24, 2019, 10:28:17 PM »
Hi,

a dump file is in my C:/logs , but it's 4 Gb big...
"SMM_TimelinePreviewObj.log"

 i assume that during a previous "help" message from me, i activated this dump on the request of one of the admin here, but is there a possibility to turn it off now or it's needed ? my videosplitter is always making windows 10 going slow a lot when using it, never had an answer about this issue, and i'm asking myself if it's not because of this dump file. Thanks.

19
Video Splitter / Re: New Timeline is not better / feedback for 7.3
« on: August 20, 2019, 04:58:22 AM »
But: the shown movie flips constantly between the position of the grey mouse pointer and the yellow real playback marker, if mouse is over timeline.
that all makes editing more complicated and susceptible to mistakes.

this is by far the most annonying thing that i experienced with the 7.3 !!

Still have issues with subtitle (.srt) as well. i spend a lot of time to resync them, very annoying unfortunatly.
hope this would be fixed one day.

I add as well an another issue that i experience at each launch. Maybe a problem with memory or graphic memory, i saw here an another user who had the same issue than me, don't know if they are more of them.
When using the software, it slows down the window of other windows apps (W10 x64 last update + i7-7700 + 32Gb of Memory DDR4), and slow down the whole computer. if Videosplitter run, and that, for example, i launch a picture viewer, in the background like, fastone viewer, it take maybe 5 secondes to load one jpg picture, even more, and it the same with any other software and windows itself.

as soon as the software is closed everything come back to normal. I didn't noticed in the task manager any information which could explain what's happening, the use of memory is ok, SSD too (i only have SSD), same with my both video cards (Nvidia GT640 external and Intel HD 630 (internal).

20
I got it. As I said earlier, I reproduced a similar behavior, so, when the fix is available, I'll post here.

hi any news about an update ? it's now 2 months, and we have no news, except the developpement of a cloud thing... i'm happy for the ones who will enjoy that, but our software is still buggy ;) any date of a possible fix for this issue ? Thanks :) !

21
I just checked both 32 and 64 bit versions and could not reproduce the problem you described. Could you please let me know what file you try to open when you see  the watermark (a file type and a video codec).
Also, I would suggest to check if you have both versions installed at the same time (by default in Program Files (x86)/Solveig Multimedia and in Program Files/Solveig Multimedia) and uninstall both of them in this case, then install the 64 bit version only and register it.

Hi just to let you know that i sent you here in PM a video file which was doing the issue. it seems it's related to the x64 version, i reverted to the 32bits version and so far didn't had this issue yet.

22
I just checked both 32 and 64 bit versions and could not reproduce the problem you described. Could you please let me know what file you try to open when you see  the watermark (a file type and a video codec).
Also, I would suggest to check if you have both versions installed at the same time (by default in Program Files (x86)/Solveig Multimedia and in Program Files/Solveig Multimedia) and uninstall both of them in this case, then install the 64 bit version only and register it.

I uninstalled the x86 version when i installed the 64 one. but yes, if i see the watermark again, i'll send you the video file with the information but usually it's Mp4/Mkv with AVC/H264.

23
Hello Marty,
The logo and watermarks are trial restrictions of the unregistered version. You need to activate the x64 version as well with your key.

the version is activated... unless i need to activate the codec too ? (but where) or that i missed something..

24
Hi, since i updated the software to 64 bits (was running the 32 bits version) i have a logo showing Elecard in the up corner of the preview video. can't remove it. i see it's in the list of codec used by your sofware. and tonight, while doing my favorite game, splitting video, i got a "trial ended of elecard, blablabla purchase proper blablabl"

yes in the past i used trial of software like progdvb, but i installed it. no idea if it's related or not. in the list of codec used by your softwate it's written Elecard Codec (custom)... i saw that in the last log of the update of the x64 bits version, there is this : 'Fixed overlaying an "Unregistered" logo on some MPEG-4 videos'

not sure if it's related. deinstalled your software and reinstalling it didn't solved the issue. i'm afraid i will switch back to the 32 bits version meanwhile, to avoid this problem because i kind of tried everything which came in mind with no luck. Thanks !

25
Video Splitter / Re: General Windows 10 x64 slowdown when using SMV 7
« on: February 22, 2019, 07:26:56 PM »
I've noticed this as well. I can only liken it to memory leaks that some software suffers from. Could it be the same problem here?

I can just tell that i switched to the 64 bits version of SMV, and unchecked the error log save, but the issue is still there :(

26
Video Splitter / General Windows 10 x64 slowdown when using SMV 7
« on: January 29, 2019, 06:05:45 AM »
Hi,

here an another issue i have with SMV. i have it since a long time (maybe with the 6 as well but my memory is bad).

when using SMV, i have a general slow down in the use of windows ! SMV work fine, but for example, i open a file to insert in SMV, or using windows while SMV is open , and everything is slow. i checked the ressource and the use of Cuda, graphic card (GT 640 Zotac), the Cpu, Hard Disc (SSD (Crucial MX500 or 850 Samsung EVO) or normal Hard Disc directly from Sata or on a network (from a synology NAS) make the same issue.
CPu use is normal as well. No idea what's doing that. I have an i7-7700, 32Gb of Ram, Windows 10 Pro x64 with a GT640 Nividia Card. This is only software of all the ones i have on windows who make this issue :D.

Actually SMV is open, windows react slowly (all the windows, opening closing, moving etc...).
Cpu in use is 0 to 2%. Ram use is 5Gb on a total of 32. (16%)
Temp on all core are very low (28° on each core).

for exemple, i click on "+" to add a video file in SMW and it take 5 seconds to open the explorer window !

It's an issue as well which happen with time. for example, SMW just crashed. I reload it, open the backup save file, and it's working ok ! windows , explorer etc... but after a while... like if something make it slowing the whole machine after a whole, maybe the recording of the error log ? or the continuus backup ? or maybe some cache issues in the software ?

Any help is much appreciated ! Thanks.

27
Hello skizlock,

I reproduced a similar behavior: when saving multiple fragments from a source file the timing of the second and other fragment's subtitles is shifted a little, but it does not start right after the last line of the first fragment's subtitle. I suppose that the problem is the same, but to make sure, could you please send me your files and a trimming project? You can send files to our technical support (support(at)solveigmm.com) or to me directly via a forum's private message. Please do include a reference to this topic in your e-mail.

Maxim, i confirm you that i have the same issue than Skizlock, that's also one of the bug i reported there earlier, by cutting several files at the same time, the external subtitles file generated have a delay and i must fix them all the time with an another software. It's happening with almost any mp4 with ext subrip .srt file.

28
Hello Marty,

I'll try to reproduce this issue. Does it mean that it is only specific to the MP4 videos?

Hello i could reproduce the subtitle empty bug and the runtime error as well. i just sent you a private message on the forum with Two dropbox Zip files with the video and subtitle in it, and the project as well which made both error happened ! Thanks ! Hope it will Help !
But to answer you, as the error happened with an MKV file, so not, it's not mp4 Specific !

29
Video Splitter / Re: SolveigMM Video Splitter 7 Home Edition Runtime Error
« on: December 18, 2018, 03:09:57 PM »
I did not have the problem with 6. I think the K-Lite includes LAV. That's what it appears to use.

I never had any problem with the 6.1 as well. but i updated to the 7.0.2 which has been released few days ago, and since then, no more crash with this error (it continue to crash randomly like it was with the 6.1), so we'll see...

30
Video Splitter / Re: SolveigMM Video Splitter 7 Home Edition Runtime Error
« on: December 10, 2018, 03:47:07 AM »
I may have solved it. I updated my K-Lite Codec Pack which was pretty old. I haven't done much since but so far so good. If all goes well I'll go back to version 7 to see how it works.

I don't use any codec pack except the LAV one who is up to date.
so not sure if it's the issue. did you had any error on the 6 too ?

Pages: 1 [2] 3 4 5