Messages

841

Обсуждение продуктов на Русском языке / Re: Склейка файлов и VLC

« on: October 01, 2013, 09:28:30 PM »

Здравствуйте Аандреич,

Удалить кусочек внутри таймлайна НЕ ПОЛУЧАЕТСЯ!!!
Ну и в конце имею странно воспроизводимое, требующее подбора плеера... Это неправильно... Или я что-то не так делаю???

Повторилась ли у вас проблема с бета версией программы? Если да, то загрузите, пожалуйста исходный файл, который пытаетесь отредактировать на какой-нибудь сервис  передачи файлов, например, dropbox.com. Также пришлите нам файл проекта после обозначения сохраняемых/удаляемых фрагментов перейдите в меню Файл -> Сохранить проект как.
Уточните, пожалуйста, какие проблемы с воспроизведением полученного фрагмента вы наблюдаете, в каких проигрывателях.
Где Вы наблюдаете серый кран?

842

Обсуждение продуктов на Русском языке / Re: проблема при склейке mts

« on: October 01, 2013, 08:54:46 PM »

Здравствуйте, Аандреич,

Скажите, пожалуйста, какую версию программы Вы используете (Справка -> О программе).

Возникнет ли зависание на бета версии программы?

http://solveigmm.com/download/SolveigMM_Video_Splitter_3_7_Beta.exe

Если зависание останется, то не могли бы Вы загрузить исходный файл на как какой-нибудь сервис передачи файлов, например, dropbox.com?

Также пришлите, пожалуйста, файл проекта. После выбора фрагментов для сохранения нужно перейти в меню Файл -> Сохранить проект как.

Заранее спасибо.

843

Обсуждение продуктов на Русском языке / Re: проблема со звуком Ali Trimmer + MKV

« on: September 24, 2013, 09:14:16 PM »

Здравствуйте tnn73,

Спасибо за ответ.

Треск может происходить из-за некорректного декодирования.

Попробуйте установить AC3 декодер, поможет ли это?

http://ac3filter.net/wiki/Download_AC3Filter

Если треск при проигрывании слышен и на файлах с другими аудиодорожками, то попробуйте установить K-lite Codeс Pack:

http://codecguide.com/download_k-lite_codec_pack_full.htm

844

Video Splitter / Re: Multiple join jobs as batch

« on: September 23, 2013, 11:19:46 PM »

Hello zeroFX,

Yes, you can use Batch Manager to process several tasks for joining.

It is not supported to use Video Splitter commands, but you can fulfill this by following the steps below:

1) Save the join list then rename it from List.jxtl to List.xtl.

2) Then clear Join Manager and add another files for joining, save the second task to the List2.jxtl file. Add from this List2.jxtl file to the List.xtl file code from <group to </group> after the </group> and before the </timeline>. 

3) Repeat step 2 for other joining tasks if necessary.

4) Replace strings <track video="-1" audio="-1" > with <track video="1" audio="1" >

You should get such code:

<timeline>
    <group name="D:\Video\output\File12.mp4" out_type="mp4" mode="joining">
      <track video="1" audio="1" >
          <clip src="D:\Video\File1.mp4" start="0" stop="9584000000" timeFormat="100ns_units" />
          <clip src="D:\Video\File2.mp4" start="0" stop="9584000000" timeFormat="100ns_units" />
      </track>
    </group>
         <group name="D:\Video\output\Video12.mp4" out_type="mp4" mode="joining">
      <track video="1" audio="1" >
          <clip src="D:\Video\Video1.mp4" start="0" stop="9584000000" timeFormat="100ns_units" />
          <clip src="D:\Video\Video2.mp4" start="0" stop="9584000000" timeFormat="100ns_units" />
      </track>
    </group>
</timeline>


5) Save the List.xtl file and open it in the Batch Manager. Start the batch processing.

845

Обсуждение продуктов на Русском языке / Re: проблема со звуком Ali Trimmer + MKV

« on: September 23, 2013, 10:06:57 PM »

Здравствуйте, tnn73,

Спасибо за вопрос.

Проверьте, пожалуйста, была ли активирована галка "Аudio" перед началом редактирования.
Если это поле отключено, то звук в полученном файле будет отсутствовать.

846

HyperCam / Re: Hypercam bar on task bar doesn't appear anymore.

« on: September 20, 2013, 11:12:31 PM »

Hello Bgrmystr2,

Thank you for questions.

..but why is that a thing? Opening as admin removes that ability? Weird.

Yes, opening as the admin disables this feature. This is the limitation for admin mode.

According to error message, we will try to find out the error reason whithout log files.
As the temporary solution uncheck the field "Start HyperCam 3" after installation.

847

Beta Testing / Re: Bug report in Video Splitter 3.7

« on: September 20, 2013, 10:30:44 PM »

Hello zeroFX,

Has there always been an option to select the renderer? That's also nice!
-> The selection for smart mode codec still seems to be pointless. It only "works" if forced, but the output files have the same hashes, regardless which codec is selected.

Could you please let us know for what you need to use this feature?
If the codec is not changed in the "Choosen codecs" list then it can't be used for this file.

848

Video Splitter / Re: Calculate destination file size alternative

« on: September 20, 2013, 09:10:28 PM »

Hello SVS123,

Thank you for your suggestion.
We will think over it and possibly add to Video Splitter's UI.

849

Video Splitter / Re: Multiple join jobs as batch

« on: September 20, 2013, 09:07:32 PM »

Hello zeroFX,

Thank you for your post.

Sure, you can save the join list right in the Join Manager and then load it to it and process.

Use File -> Save Join List as/Load Join List menus to fulfill this task.

850

Video Splitter / Re: How to Split MKV file with 2 Audio and Subtitle?

« on: September 20, 2013, 08:48:28 PM »

Hello zeroFX,

Thank you for your question.

Yes, it will be possible in the future, it is hard to say at the present time when this feature will be released.
Thank you for your patience.

851

Beta Testing / Re: Bug report in Video Splitter 3.7

« on: September 19, 2013, 11:20:56 PM »

Hello zeroFX, holgermh,

Please try to use the latest version with fixed bug of Video Splitter crashing when select another video/audio stream. The bug with saving settings for output file mask was also fixed.

http://solveigmm.com/files/SolveigMM_Video_Splitter_3_7_1309_18_Beta.exe

Please let us know what will be your result.

852

Video Splitter / Re: Calculate destination file size alternative

« on: September 18, 2013, 09:06:13 PM »

Hello SVS123,

Thank you for your post and question.

This method of destination file size calculation is very inaccurate.
Sometimes video have several video/audio streams, but after editing it is possible to save only one video/audio track. In this case this method will not be suitable.
Also there is not always the direct dependence between the file size and duration, the outut file duration depends on the format of the container and using muxer.

853

HyperCam / Re: Hypercam bar on task bar doesn't appear anymore.

« on: September 18, 2013, 12:58:01 AM »

Hello Bgrmystr2,

Thank you for your reply.

Upon install of the beta of Hypercam 3, I was given the same error message that states
CreateProcessWithTokenW failed with error 740: The requested operation requires elevation.

Could you please record and send log files to support(at)solveigmm(dot)com to find out why this problem happens? 
Here is the guideline about how to record them. 

As I've said before problem with locking of other programs and PC when HyperCam is opened is known and will be fixed in the future.

With this version, it has yet again refused to minimize to the hypercam bar that shows up on my taskbar.

Please check if you have the selected "Minimized to HyperCam bar" in Interface tab of Options.


Also if you open HyperCam 3 as administrator then it will not be minimized to the bar.
And there is also the one condition, the Internet Explorer version should be 7 or higher.

854

Beta Testing / Re: Bug report in Video Splitter 3.7

« on: September 18, 2013, 12:22:00 AM »

Hello zeroFX,

Thank you for your post and sample file.

The problem was reproduced, will will fix it shortly.

Please keep an eye on this thread for news.

855

HyperCam / Re: Hypercam bar on task bar doesn't appear anymore.

« on: September 16, 2013, 11:41:13 PM »

Hello Bgrmystr2,

Thank you for your post.

Please try to install the latest beta version of HyperCam 3:

http://www.solveigmm.com/download/SolveigMM_HyperCam_3_5_Beta.exe

Please let us know if it will be possible to record with any video сompressor, not only with uncompressed video. Please specify if you have any video copresors in HyperCam list in Options -> Video -> Video compressor or do you get any error message when try to select any video compressor?
If the propblem remains then please record and send us the log files. Please take a look on this guideline to find out how to record them. 

Could you please let us know what have you tried to record. If this is something from the Internet, please give us the link.

Will the freezing and audio skipping remain with the beta version? If yes, please specify with what Video/Audio settings (you can send us screenshots as well as log files to support(at)solveigmm(dot)com).

A friend of mine, when booting Hypercam 3, all of his programs freeze, including hypercam, and stop responding. Sometimes he can get away with closing them, but other times he has to restart.

We are aware of such behaviour of HyperCam 3 on some PCs. We will fix it in future, but the exact time when this will be done is yet unknown.